LCD screen goes black often? - lcd corner solutions
Hi friends,
I have a Cornut specification as follows:
Mark 1): Asher
2) Display: LCD 19 "
3) OS: Wind XP 2002 SPS3
4) CPU: Dual - Intel Pentium E2200, 2.20 GHz
5) RAM: 4 GB (2 cards each with 2 GB), but it is only 3 GB.
I use this computer since January 2008, almost 2 years
Time to time - in my diary with my sceen is black and seening only small dialog box in the middle of the screen is blank and the message (not allowed any input) and the little dialog box begins to move to the right until Coreen side of the screen and then gradually once more into the corner on the left side of the screen, etc. .. just move slowly and gradually,
You can not move or do something that disturbs, it is a question?
Sometimes during a chat conference, I can always with my friends, and always have their voice, but I do not see anything .. and I can either use the keyboard or mouse only the whole screen is balck little box with the movements slowly and gradually .. Theis!
This happens frequently and often
One explanation for this?
Any reason why?
Any solution for this?
I was very annoyed, even before I had another computer that I lived hnever this vexing problem,
Any idea or advise to remove from this it is really appreciated, and I am very glad that Stoipi happnening,
Thank you for everything in advance,
Friday, February 19, 2010
Lcd Corner Solutions LCD Screen Goes Black Often?
Subscribe to:
Post Comments (Atom)
5 comments:
Check the display settings .. Therefore, you only see 3gig of memory is probably because you are 16-bit Windows. only 3 points are written in the memory of his sole 4gig memory recognized
Screen Protector .... Check the settings of Power Management
There are 3 reasons:
1) Your monitor can be pierced in the lid or damaged.It is not safe to repair your self.Better a workshop.
2) The parameters of the screen saver you can use your screen saver none.If following changed.Change try to run, increase the time the screen saver (100 mnts or almost).
3) If so, when you open your computer and the screen off.Go "Control Panel"> "Leave Power options> Change when the option off, the computer screen comfortably at once.
Or go to a workshop
That is the problem of power management, not the screen saver. try this.
1. the right-click anywhere on the desktop and select Properties
2. Select the screen saver on (where it is, desktop themes, screen savers), ...
3. If there is a button labeled "Power" at the bottom. Click
4. all the drop-down menu and make sure to change everything to "never"
5. its over! Simply click "OK".
I hope this has solved the problem.
PS: If you have Windows XP 32-bit 64-bit? that the 64-bit operating system can recognize more RAM than 3GBs. I suggest you buy a 64-bit operating system for all 4 GB of RAM will be recognized and used to be.
Hello, momtaz_Bkk
There are 3 steps to see the black screen
If you have black screen error then there is a 94% chance that your computer registry problems. You must immediately correct it. The following software is a professional solution for error on the black screen can also correct many common computer errors. I think you should try, I think it can help you:
* Step 1 - Repair Tool Download an error screen, you install this update tool error.
* The black screen appears open repair tool and scan your computer for free
Step 3 - Then click the button again and it repaired all away!
Here is the URL of the error repair tool black screen: http://www.RepairErrorDiy.com/ttfix-blac ...
Post a Comment